Profiled aluminium soffits and facias offer a cost effective eaves level system which is corrosion resistant and virtually maintenance free.

In addition, it allows the architect to specify a total colour co-ordinated roofline solution which will enhance almost any project and has the added benefit of being sourced from one supplier.

Almost any size and shape of system can be individually tailored to your requirements.

Material used is normally 14 SWG (2mm) aluminium sheeting with other thicknesses available upon request.

Finish can be plain "Mill Finish" or in one of our range of 135 polyester powder coatings.

THE SINGLE PROFILE SYSTEM
This system has been designed so that minimal fixings are visible. Each section is joined by an internal or external profile collar.

The single system has a combined facia/soffit girth of 1500mm.

THE TWO PART FACIA/SOFFIT SYSTEM
This system is similar in appearance to the above. It is recommended when the girth of the facia and soffit combined exceeds 1500mm. The maximum girth for the two part system is 1500mm. The maximum girth for the two part system is 1500mm for the facia and 1500mm for the soffit.

SOFFIT PLANKING SYSTEM
This system is recommended when the girth of the soffit exceeds 3.0m.

Each plank is 100mm wide and locks into its adjacent plank. A secret fixing system is sued to ensure an aesthetically pleasing finish. There are no restrictions on the girth of this system makingit an ideal alternative to traditional materials.

Once again, our planking system can be powder coated to and RAL or BS colour to provide a co-ordinated roofline solution.

Please consult our design team for details of finishing trims that we fabricate as required.

NOTICE
Whilst every effort has been taken in the compilation of this brochure, no responsibility can be accepted for any errors or omissions contained therein.

We reserve the right to modify or change designs without notice, pursuant to our policy of continuing product development and improvement.