home

JWD “CUMULUS” HALF ROUND GUTTERS

The JWD “Cumulus” range of half round gutters. It is fully interchangeable with gutters of similar section and is therefore ideal for restoration and refurbishment programmes. This profile is also often specified for new build projects.

There are three nominal widths within the “Cumulus” range, 100mm, 113mm and 125mm (4”, 41/2” & 5”). Each length is supplied with a left hand cast on socket as viewed from the front. Supplied in “mill finish” or a choice of 135 standard polyester powder coatings. (Further information - Acrobat file of colour chart).

N.B. All gutter lengths and angles are supplied with one left hand cast on socket. All outlets are supplied with two cast on sockets. All nuts and washers are supplied in “mill-finish” only. (See “sitework” information.)

ANGLES

Angles	100mm - 4"	112mm - 4.5"	125mm - 5"
External Angles 90	JHR4/2	JHR45/2	JHR5/2
Internal Angles 90	JHR4/3	JHR45/3	JHR5/3
External Angles 135	JHR4/4	JHR45/4	JHR5/4
Internal Angles 135	JHR4/5	JHR45/5	JHR5/5
Non Standard Angles	JHR4/6	JHR45/6	JHR5/6

BRACKETS

Brackets	100mm - 4"	112mm - 4.5"	125mm - 5"
Fascia Brackets	JHR4/7	JHR45/7	JHR5/7
Rafter Brackets - Top Fix	JHR4/20	JHR45/20	JHR5/20
Rafter Brackets - Side Fix	JHR4/21	JHR45/21	JHR5/21
Rise & Fall Brackets	JHR4/22	JHR45/22	JHR5/22

"CUMULUS" HALF ROUND GUTTERS CAST ALUMINIUM

100mm - 4"

112mm - 4.5"

Length of Gutter	Code	Mill Finish	P.P.C.	Code	Mill Finish	P.P.C.
1.83m (6") Length Gutter	JHR4/1	£ 27.72	£ 33.32	JHR45/1	£ 28.00	£ 33.88
Angles
External Angles 90°	JHR4/2	£ 9.52	£ 11.76	JHR45/2	£ 9.80	£ 12.04
Internal Angles 90°	JHR4/3	£ 9.52	£ 11.76	JHR45/3	£ 9.80	£ 12.04
External Angles 135°	JHR4/4	£ 9.52	£ 11.76	JHR45/4	£ 9.80	£ 12.04
Internall Angles 135°	JHR4/5	£ 9.52	£ 11.76	JHR45/5	£ 9.80	£ 12.04
Non Standard Angles	JHR4/6	£ 11.76	£ 14.00	JHR45/6	£ 12.04	£ 14.28
Stop Ends / Jointing Clips
Stop Ends - External	JHR4/8	£ 3.64	£ 4.76	JHR45/8	£ 3.92	£ 5.04
Stop Ends - Internal	JHR4/9	£ 3.64	£ 4.76	JHR45/9	£ 3.92	£ 5.04
Union Jointing Connector	JHR4/10	£ 3.92	£ 5.04	JHR45/10	£ 4.20	£ 5.32
Outlets
Outlets - 63mmØ	JHR4/11	£ 10.36	£ 11.48	JHR45/11	£ 10.92	£ 12.32
Outlets - 75mmØ	JHR4/12	£ 10.36	£ 11.48	JHR45/12	£ 10.92	£ 12.32
Outlets - 100mmØ	JHR4/13	N/A	N/A	JHR45/13	N/A	N/A
Brackets
Fascia Brackets	JHR4/7	£ 2.24	£ 3.08	JHR45/7	£ 2.80	£ 3.64
Rafter Brackets - Top Fix	JHR4/20	£ 5.04	£ 6.44	JHR45/20	£ 5.50	£ 7.56
Rafter Brackets - Side Fix	JHR4/21	£ 5.04	£ 6.44	JHR45/21	£ 5.50	£ 7.56
Rise & Fall Brackets	JHR4/22	£ 8.50	£ 9.75	JHR45/22	£ 9.50	£ 10.75

"CUMULUS" HALF ROUND GUTTERS CAST ALUMINIUM

125mm - 5"

150mm - 6"

Length of Gutter	Code	Mill Finish	P.P.C.	Code	Mill Finish	P.P.C.
1.83m (6") Length Gutter	JHR5/1	£ 29.96	£ 36.12	JHR6/1	£ 37.60	£ 44.75
Angles
External Angles 90°	JHR5/2	£ 10.64	£ 12.88	JHR6/2	£ 11.75	£ 14.15
Internal Angles 90°	JHR5/3	£ 10.64	£ 12.88	JHR6/3	£ 11.75	£ 14.15
External Angles 135°	JHR5/4	£ 10.64	£ 12.88	JHR6/4	£ 11.75	£ 14.15
Internall Angles 135°	JHR5/5	£ 10.64	£ 12.88	JHR6/5	£ 11.75	£ 14.15
Non Standard Angles	JHR5/6	£ 12.88	£ 15.12	JHR6/6	£ 12.50	£ 14.90
Stop Ends / Jointing Clips
Stop Ends - External	JHR5/8	£ 4.20	£ 5.32	JHR6/8	£ 4.55	£ 5.50
Stop Ends - Internal	JHR5/9	£ 4.20	£ 5.32	JHR6/9	£ 4.75	£ 5.83
Union Jointing Connector	JHR5/10	£ 4.48	£ 5.60	JHR6/10	£ 4.80	£ 5.92
Outlets
Outlets - 63mmØ	JHR5/11	£ 10.92	£ 12.32	JHR6/11	£ 11.20	£ 12.70
Outlets - 75mmØ	JHR5/12	£ 10.92	£ 12.32	JHR6/12	£ 11.20	£ 12.70
Outlets - 100mmØ	JHR5/13	£ 11.20	£ 12.77	JHR6/13	£ 11.20	£ 12.77
Brackets
Fascia Brackets	JHR5/7	£ 3.36	£ 4.20	JHR6/7	£ 3.50	£ 4.45
Rafter Brackets - Top Fix	JHR5/20	£ 6.44	£ 7.84	JHR6/20	£ 6.00	£ 7.25
Rafter Brackets - Side Fix	JHR5/21	£ 6.44	£ 7.84	JHR6/21	£ 6.00	£ 7.25
Rise & Fall Brackets	JHR5/22	£ 9.75	£ 11.00	JHR6/22	£ 10.00	£ 11.25

Length	100mm - 4"	112mm - 4.5"	125mm - 5"
1.83mm - 6ft	JHR4/1	JHR45/1	JDF5/1

Ends / Unions	100mm - 4"	112mm - 4.5"	125mm - 5"
Stop Ends - External	JHR4/8	JHR45/8	JHR5/8
Stop Ends - Internal	JHR4/8	JHR45/8	JHR5/8
Union Joint Connector	JHR4/10	JHR45/10	JHR5/10